Laboratory Test Request Form | Momentive Silicones for Building

Customer Details

First Name

Last Name

Phone Number

Company Name

Company Street Name & Number

Company City

Company State/Region

Company Zip/Postal code

Company Country

Project Details

Project Name

Project Street Name & Number

Project City

Project State/Region

Project Zip/Postal Code

Project Country

Please choose a project type

Residential

Commercial

Other (please specify)

Other Project Type

Installer Details

Same as Customer Details

Other (please specify)

Installer Company Name

Test Details

Choose your preferred cleaning solvent (multiple can be selected)

IPA

Xylene

Acetone

Toluene

Other

Other Preferred Cleaning Solvent

Choose your preferred silicone primer (multiple can be selected)

SS44UV

SS4044P

SS4004P

SS4179

SS80

GE to recommend

Choose your application type (multiple can be selected)

Weatherseal

Structural Glazing

Insulating Glass

Air & Water Barrier Coating

Roof Coating

General

Other

Other Application Type

How many substrates will be tested?

Substrate 1 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - A quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Use these sealants and tests across all substrates?

Yes - This will check the same sealants and tests on the number of substrates you've requested. Don't worry, you can change further selections.

Substrate 2 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 3 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 4 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 5 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

Option Value

No results found

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 6 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 7 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 8 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 9 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 10 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 11 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 12 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 13 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 14 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 15 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 16 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 17 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 18 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 19 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Substrate 20 details

Please complete as many fields as possible, note which surface to test in comments.

Substrate

No results found

Option Value

Manufacturer

Substrate ID

Color

Comments

Select the sealants you'd like testing (multiple can be selected)

Contractors SCS1000

Construction SCS1200

Sanitary SCS1700

SilPruf SCS2000

SCS2350

Elemax 2600

SilPruf LM SCS2700

SilGlaze II SCS2800

SilGlaze II SCS2811

SilShield 3100

Optic 3101

EdgeSil IGS3103

Enduris 3500

Enduris 3525

EdgeSil IGS3713

EdgeSil IGS3723

UltraGlaze SSG4000

UltraGlaze SSG4000AC

UltraGlaze SSG4400

UltraGlaze SSG4400 (with SSG4713B or SSG4710B)

UltraGlaze SSG4600

UltraGlaze SSG4650

Elemax 5000

RapidStrength RGS7700

SilPruf NB SCS9000

Enduris Liquid Flashing

Other Sealant(s)

Sample Description

Select the tests you'd like to be done (multiple can be selected)

Adhesion - Please submit a substrate for every finish (including different colors)! Include at least a 6” x 8” surface area of each substrate for each sealant to be tested.

Compatibility - Relevant to accessories such as: gaskets, setting blocks, shims, etc. Please include at least 1 x 6” length of the gasket, tubing, seal, etc. for each sealant to be tested.

Stain (natural stones only) - Please provide 1” x 3” cuts of the substrate (at least 12 of each type) for each sealant.

Adhesion Development* - (only relevant to 2-component sealants) – This testing not needed in most adhesion testing cases.

Tensile Adhesion - a quantitative measurement of the properties of structural sealants (typically an internal test)

Snap Time Test - Determine if the mix ratio is correct and whether the sealant is curing properly (typically an internal test)

Additional Comments or Questions

Send Report(s) To

First Name

Use the same details as customer details

First Name

Last Name

Phone Number

Company Name

Company Street Name & Number

Company City

Company State/Region

Company Zip/Postal code

Company Country

Additional Email Address (please seperate with a comma)

Momentive Account Manager

Abel Macias

Andrew Rossi

Darren Jump

Doug Walker

Errol Bull

Grethel Martinez

Logan Tichenor

Mauro Medeiros

Noelia De Dios

Need help finding your account manager? Find them here.

^{*Adhesion Development testing is only relevant to 2-component sealants.}

^{Any non-GE liquid product (sealants, coatings, primers, etc…)MUST be accompanied by SDS paperwork}

Minimum Sample Sizes & Quantity

Finished Metal: 36 sq in per sealant

Glass/IG: 36 sq in per sealant

Masonry: 36 sq in per sealant

Rubber: 6 lin in per sealant

Still unsure about the appropriate amount of substrate to submit for various tests?
‍Find out here.

Sent to:

Application Development Center, Bldg. 22
Momentive Performance Materials
260 Hudson River Road
Waterford, NY 12188

wattestlab@momentive.com

A copy of this form must be included with the substrates

Please note: after submitting the request form, you will receive a copy of your submission via email.

Thank you for submitting your request!

Your request will be processed shortly. We'll keep you updated on your laboratory test progress via email.

Oops! Something went wrong while submitting the form.

Lab Test Request Form

Maximize project performance with our sealant and coating suitability testing.

Customer Details

Project Details

Test Details

Substrate 1 details

Substrate 2 details

Substrate 3 details

Substrate 4 details

Substrate 5 details

Substrate 6 details

Substrate 7 details

Substrate 8 details

Substrate 9 details

Substrate 10 details

Substrate 11 details

Substrate 12 details

Substrate 13 details

Substrate 14 details

Substrate 15 details

Substrate 16 details

Substrate 17 details

Substrate 18 details

Substrate 19 details

Substrate 20 details

Send Report(s) To

Minimum Sample Sizes & Quantity

Sent to:

Thank you for submitting your request!

Account Managers

Keep updated with our email roundups.